EvoDry EDC 1.0 Dehumidifier - MPO

This shows how the dehumidifier is set up and some status.

Back

• If you press  you will return to the “View” menu.

Moisture Inst:

• Displays the hygrostat setting.

Moisture management:

• Shows how the dehumidifier is controlled, according to the hygrostat or also taking into account temperature.

Fan control:

• Shows how the fan is set, runs constantly or stops and makes test runs to read the moisture content.

Start delay:

• Counts down the time from when the moisture content exceeds the set value until dehumidification starts.
• Displayed only if the start delay is enabled and time is left.

Starting sequence:

• Counting down time with constant dehumidification.
• The dehumidifier reduces the desired set moisture content with the 70% for a number of days.
• This is to properly dry out materials in the space and not just the air.
• Displayed only if start sequence is enabled and time is remaining.

Donor value:

• Displays “Locked” if no new value is read because the fan has not been running long enough or if the dehumidifier is in the drying phase for PD models.
• Displayed only if the sensor values are locked.

Nothing is customisable in this menu!