EvoControl Ventilation - MPO1 Display

Step 1:

Select “Menu” and press Enter.

Step 2:

Scroll down to “Settings” and press Enter.

Step 3:

Enter authorisation code 6374 (8990 for advanced) and press Enter.

Dial one digit at a time, it is done with Arrow up and Down arrow and confirmed by Enter.

Confirm the dialled code by pressing Enter when “-” is selected.

Step 4:

Select the type of parameter group to be set.

Step 5:

Set the desired parameters.

Ex. Parameter 110, Fan supply air, Spar.

Select “Fan” and press Enter.

Select “Fan TL Spar” and press Enter.

Increase or decrease the value by Arrow up or Down arrow and then press Enter.

Confirm by selecting “Save = Yes” and press Enter.

Display parameters are hidden depending on the model or other configuration.

Parameters with authorisation level 2 are displayed not if you have logged in with authorisation level 1.

Changing the authorisation level can be done with the button Advanced settings. Code.

Set values are maintained after power cuts and software updates.