EvoControl Ventilation - MPO1 Display

The wiring between the unit and the display is pre-assembled. The cable harness can be extended with its own 4-conductor, max 25 metres, min conductor area 0.25 mm2 (pair-winning is recommended).

See the electricity schedule here.

Installation of the display

• The control panel is mounted directly on a flat surface.
• The cable can be pulled upwards, downwards or straight backwards.
• For downward installation, the back cover must be unscrewed and turned over.

Connect the supplied wiring harness (crossover modular cable) to the connector on the bottom of the control panel.

Open the flaps on the front of the control panel and screw it to the base.

Close the flaps again.