EvoControl Ventilation Touch Display
Models: Models will be available here shortly.
6.1 Display installation
The wiring between the unit and the display is pre-installed. The wiring can be replaced with your own 4-wire, max 50 metres, min conductor area 0.25 mm2 (pair-winning is recommended).
Installation of the display
1. push the bezel away from the display by holding the edges of the bezel and pressing lightly on the display.
2. unscrew the 4 screws on the sides of the display.
3. Mount the wall plate over any existing wall box or surface-mounted using the supplied plastic spacers and screws.
4. Connect the cable to the terminal on the display.
Cables can be released from contact by inserting an object (e.g. small needle) into the slot above the cable.
Check that the cables are securely connected and that no strands are sticking out!