⚠️ The website is under development. Subject to compatibility issues and possible typographical errors.
English (UK)
English (UK)
EvoDry 6H 2.0 is designed for smaller spaces, especially those that are used less frequently. The desiccant dehumidifier is designed for user-friendly operation, high durability and easy maintenance. It is equipped with an electronic hygrostat, has a low weight and low noise level and is easy to install. Electrical connection is via cable with plug (approx. 2 m).
The dehumidifier is well suited for unheated or periodically cold environments with a risk of moisture damage, such as boats, caravans, motorhomes, storage rooms, sheds, warehouses, cold rooms, containers, covered car trailers, basements, tack rooms and holiday homes. The unit can also be supplemented with accessories such as a wall bracket or process air outlet.
The following are included:
Acetec EvoDry dehumidifiers are manufactured and quality assured in Älvsbyn, Sweden.
Mer information finns på www.acetec.se. Sök på aktuell produkt (art.nr 20010). EvoDry 6H 2.0 är inte avsedd för krypgrund eller kallvind. För dessa applikationer rekommenderas EvoDry RCF 12 (art.nr 20012) eller EvoDry RCF 20 (art.nr 20020).
For technical advice or to request a quote, please contact sales@acetec.se
| Specification | Value |
|---|---|
| Suitable up to (m³) | 100 |
| Control panel | No, it is not. |
| Wet air flow (m³/h) | 20 |
| Dry air flow rate (m³/h) | 110 |
| Capacity at 20°C/60% RF (l/24h) | 7,4 |
| Sound level (dBA) | 48 |
| Hedging (A) | 10 |
| Power, fan, nom (W) | 25 |
| Power, at dehumidification (W/h) | 530 |
| W x H x D (mm) | 217 / 225 / 307 |
| Weight (kg) | 5,4 |
The dehumidifier is intended for installation indoors or in a weather-protected area only. It must not be installed in environments with aggressive or explosive gases, and must not be exposed to water splashes or submerged in water.
The dehumidifier is placed in the space to be dehumidified or outside using accessories. The wet gas hose (50 mm) is led out of the space being served and connected to the outlet plate mounted on the outside of the wall.
The hole through the outer wall should be approximately 70 mm. A duct or hose can be fitted to the dehumidifier's connector to distribute the dry air in the room. The suction side, where the humid air is drawn in, can also be connected using the accessory. process air blast.
Electrical connection is via cable with plug to earthed socket 1×230 V with its own 10 A slow-blow fuse.
The dehumidifier has a built-in electronic hygrostat with settings via a graduated scale located at the intake filter. There you can easily set the desired setpoint. When the humidity exceeds the set value, dehumidification starts automatically. For continuous operation, the knob can be set to the position. "ON".
Various operating modes for the dehumidifier fan can be set using switches on the circuit board:
EvoDry 6H 2.0 requires minimal maintenance. Maintenance is simple and mainly consists of filter replacement and light internal cleaning (vacuuming). This basic maintenance is important for the dehumidifier to function optimally and have a long service life.
| Specification | Value |
|---|---|
| Terms and conditions of guarantee | AG 20 |
| EC | Yes |
| Dehumidification type | Sorption |
| Working range (°C) | -20 to +40 |
| Suitable up to (m³) | 100 |
| Control equipment | Hygrostat |
| Wet air flow (m³/h) | 20 |
| Wet air blast (mm) | 50 |
| Dry air blast (mm) | 1 × 100 |
| Dry air flow rate (m³/h) | 110 |
| Capacity at 20 °C/60 % RF (l/24h) | 7,4 |
| Capacity up to (l/24h) | 7,4 |
| Sound level (dBA) | 56 |
| Hygrostat setting (%) | 0 to 100 |
| Power, fan, nom (W) | 25 |
| Dehumidification power (W/h) | 530 |
| Connection voltage (V) | 1 × 230 |
| Hedging (A) | 10 |
| IP class | IP21 |
| W x H x D (mm) | 217 / 225 / 307 |
| Weight (kg) | 5,4 |
| Filter class | G4 |
| Coatings / Materials | Magnelis |
| Corrosion class | C4 |
Svenska Svenska English (UK)
Deutsch
Dansk
Norsk bokmål
Íslenska
Suomi
Eesti
Latviešu valoda
Lietuvių kalba