Changelog EvoControl Pro series
Models: EvoDry 30 Pro – 180 Pro
1. programme version
Set values are not changed during a software update.
2025-10-03
General:
- Internal improvements.
Bugs:
- Network bug regarding static IP fixed.
2025-02-19
General:
- Internal improvements.
- Small adjustments to temperature reading and cloud service management.
2024-10-30
General:
- Internal improvements.
- Adjustment of response time for Modbus reading.
Bugs:
- An A alarm does not stop the unit unless “Emergency = On”.
2024-10-07
General:
- Internal improvements.
- Delay in software reset so that values can be safely stored away at restart.
New:
- Ominitisation of modbus in case of no communication.
- New parameter Id for “Timer” (Id 8000->) and “Alarm / Alarm history” (Id 9000->).
- Note: New parameter id for “Time clock” and “Alarm / Alarm history”, affects those using Modbus!
2024-04-01
General:
- Internal improvements.
New:
- Parameter (5220) inserted that can be activated in case of network loss to do an automatic software restart.
2022-07-11
General:
- Internal improvements.
New:
- Split priority order for external inputs (parameters 470-472), Save-External 2 (terminals 1-6) / Stop (terminals 7-8) / Fire (9-10).
Bugs:
- If “Auto” is selected in the timer, the “Auto” button must also be active.
2022-04-12
General:
- Internal improvements.
- Aligned texts in the control panel.
- Larger network buffer.
- Redirection of EvoCloud.
New:
- The humidity deviation output, terminal 36, can be used, for example, to change external ventilation.
2021-11-09
General:
- Internal improvements.
- Aligned texts in the control panel.
New:
- Parameter for “Simplified control panel”, (means that the menu Operation and Timer is missing and replaced by the capacity buttons in the display menu).
2021-10-25
General:
- Internal improvements.
- Aligned texts in the control panel.
New:
- Can switch off internal moisture sensor and use only external moisture sensor instead.
Bugs:
- The control panel updates humidity and temperature values even when the control panel is in screen saver mode.
- Reduced flicker in some control panels, other solution is to increase brightness to 100% (parameter 5110).
2021-08-28
General:
- Internal improvements.
- Aligned texts in the control panel.
New:
- Improved control of communication with the control panel.
- Easier restart of the timer after a temporary override, one press of the timer button is enough.
- More information boxes are displayed for “unauthorised” presses on the control panel.
2021-06-23
General:
- Internal improvements.
- Aligned texts in the control panel.
New:
- Adjustable start and stop hysteresis.
Bugs:
- At “last input” and “external stop” or “external fire” the unit cannot be restarted. Solution: In case of “external stop” = hold down the stop button for 2 seconds then the unit will start. In case of “external fire” = change prioritisation (pararmeter 470) to “PRIO” and save then switch back to “LAST” then start the unit.
2021-02-26
General:
- Internal improvements.
New:
- Newly produced units show the inspection date and commissioning time under “System info”.
Bugs:
- None.
2020-12-17
General:
- Internal improvements.
New:
- None.
Bugs:
- The timer function “Auto fan” did not work correctly.
- “Auto-fan” did not work properly.
2020-11-26
General:
- Internal improvements.
New:
- Drying out function of rotor and dehumidifier after dehumidification period.
- Post-cooling of dehumidifiers after dehumidification period.
Bugs:
- ModBus, can read more than 16 “active alarms”, zero alarm history has new parameter number 11005.
2019-11-04
General:
- Internal improvements.
New:
- Modified screen saver.
Bugs:
- None.
2019-09-27
New:
- Statistics to EvoCloud.
Bugs:
- None.
2019-08-16
New:
- Must confirm “Reset”.
- Test function.
Bugs:
- None.