AVC-02 Ventilation
Models: A50S G1, A70T G1–G2, A100S G1–G2, A110T G1–G2, A200S G1, A170T G1, A900ST G1
3.4 Programming
There are two types of programming modes.
- Programming mode 1: Parameters related to regulation, capacity and temperatures.
- Programming mode 2: Parameters related to the configuration of the unit.
Activation of programming mode 1:
Press the buttons at the same time 
and 
for 2 seconds until the first programme parameter 
appears in the display window.
Activation of programming mode 2:
Press the buttons at the same time 
and for 5 seconds until the first programme parameter appears in the display window.
Change of parameter in programming mode:
With the buttons and you move up or down among the parameters .
Display the parameter value in programming mode:
Press and hold button to display the parameter value
Change parameter values in programming mode:
Scroll to the parameter you want to change and then press while pressing to reduce or to increase the value.
The value is automatically saved when you release the button .
Exit programming mode:
To exit the programming mode, repeatedly press or past the last parameter then the display shows 
for a short while.
Otherwise, it will also automatically exit programming mode after 5 minutes since the last button press.
For further reading: See parameters