APU 1700 is a high efficiency air purifier for residential and commercial applications. It is equipped with HEPA 14 filters according to EN 1822 for highly efficient particle removal in demanding indoor environments. The APU 1700 is suitable for public environments such as offices, clinics, schools and workplaces as well as for use in the home.
Brochure
filter bar
- Pre-filters: Filter class G4
- VOC Molecular Filter: Carbon RAD (Rapid Adsorption Dynamics)
- Particulate filters: HEPA 14 with 36 m² filter area
Full product information is available at www.acetec.se

APU air purifiers are manufactured and quality assured in Älvsbyn, Sweden.
Technical data
| Specification | Value |
|---|---|
| Terms and conditions of guarantee | AG20 |
| Suitable up to (m²) | - |
| Power, fan, nom (W) | 162 |
| Connection voltage (V) | 1 x 230 |
| Hedging (A) | 10 |
| Filter class | HEPA 14 |
| Placement | Mobile version with wheels |
| W x H x D (mm) | 815 / 795 / 695 |
| Weight (kg) | 46,5 |
| Coatings/Materials | Natural anodised aluminium |
For technical advice or to request a quote, please contact sales@acetec.se
Capacity
| Capacity | ||||||
|---|---|---|---|---|---|---|
| Capacity, m3/h, stepless | 110 | 400 | 725 | 1080 | 1420 | 1675 |
| Sound, LpA, dB(A) | 20 | 30 | 38 | 46 | 53 | 55 |
| Power, W | 3 | 10 | 28 | 60 | 114 | 162 |
| Room area, m² | 35 | 120 | 220 | 320 | 430 | 500 |
Installation Instructions
Placement
Place the air purifier in the centre of the room to ensure even air circulation throughout the space. Leave at least 10-20 cm of free space around the sides and back of the unit.
Connect the plug to a grounded electrical outlet.
Electricity connection
The power strip has a length of approximately 2 metres and is equipped with a plug for easy installation. The plug is connected to an earthed wall socket (1×230 V) and must be protected by a 10 A slow-blow fuse.

Air purifier APU 500 and APU 1700.
Operation
The capacity can be steplessly adjusted with the knob (see picture below) on the front. Feel free to start at a lower setting and increase as needed depending on the room size and air quality.
Operation and Maintenance
Service
- Disconnect the electrical connection before servicing by pulling the plug.
- Ensure that no one can reconnect the air cleaner during the work.
- Loosen the top plate by removing the 6 screws with a star chisel.
- Pull up and remove the old filters straight up.
- Gently vacuum the inside of the air purifier and clean with a mild detergent if necessary.
- Install new filters. A total of 2 filters are needed per air purifier: 1 HEPA filter and 1 pre-filter. Original filters can be ordered directly at www.acetec.se
Service interval: Perform service twice a year or when needed.


HEPA 14 filter
Technical Data Sheet
| Specification | Value |
|---|---|
| Terms and conditions of guarantee | AG20 |
| EC | Yes |
| Suitable up to (m²) | 150 |
| Sound level (dBA) | 20 - 55 |
| Power, fan, nom (W) | 162 |
| Connection voltage (V) | 1×230 |
| Hedging (A) | 10 |
| IP class | IP21 |
| Width (mm) | 815 |
| Height (mm) | 795 |
| Depth (mm) | 695 |
| Weight (kg) | 46,5 |
| Filter class | HEPA 14 |
| Coatings/Materials | Natural anodised aluminium |


