APU 500 is a high-efficiency air purifier for homes and small premises. It filters viruses and bacteria, among other things, and is equipped with HEPA 14 filters - the highest filter class used in operating theatres, for example. The APU 500 is suitable for both public and domestic use and is recommended for spaces up to 150 m².
Brochure
filter bar
- Pre-filters: Filter class G4
- VOC Molecular Filter: Carbon RAD (Rapid Adsorption Dynamics)
- Particulate filters: HEPA 14 with 9.7 m² filter area
Full product information is available at www.acetec.se

APU air purifiers are manufactured and quality assured in Älvsbyn, Sweden.
Technical data
| Specification | Value |
|---|---|
| Terms and conditions of guarantee | AG20 |
| Suitable up to (m²) | 150 |
| Power, fan, nom (W) | 73 |
| Connection voltage (V) | 1 x 230 |
| Hedging (A) | 10 |
| Filter class | HEPA 14 |
| Placement | Mobile version with wheels |
| W x H x D (mm) | 510 / 772 / 390 |
| Weight (kg) | 21,7 |
| Coatings/Materials | Natural anodised aluminium |
For technical advice or to request a quote, please contact sales@acetec.se
Capacity
| Capacity | ||||
|---|---|---|---|---|
| Capacity, m3/h, stepless | 43 | 173 | 350 | 520 |
| Sound, LpA, dB(A) | 25 | 38 | 50 | 57 |
| Power, W | 3 | 11 | 33 | 73 |
| Room area, m² | 15 | 45 | 100 | 150 |
Installation Instructions
Placement
Place the air purifier in the centre of the room to ensure even air circulation throughout the space. Leave at least 10-20 cm of free space around the sides and back of the unit.
Connect the plug to a grounded electrical outlet.
Electricity connection
The power strip has a length of approximately 2 metres and is equipped with a plug for easy installation. The plug is connected to an earthed wall socket (1×230 V) and must be protected by a 10 A slow-blow fuse.

Air purifier APU 500 and APU 1700.
Operation
The capacity can be steplessly adjusted with the knob (see picture below) on the front. Feel free to start at a lower setting and increase as needed depending on the room size and air quality.
Operation and Maintenance
Service
- Disconnect the electrical connection before servicing by pulling the plug.
- Ensure that no one can reconnect the air cleaner during the work.
- Loosen the top plate by removing the 6 screws with a star chisel.
- Pull up and remove the old filters straight up.
- Gently vacuum the inside of the air purifier and clean with a mild detergent if necessary.
- Install new filters. A total of 2 filters are needed per air purifier: 1 HEPA filter and 1 pre-filter. Original filters can be ordered directly at www.acetec.se
Service interval: Perform service twice a year or when needed.


HEPA 14 filter
Technical Data Sheet
| Specification | Value |
|---|---|
| Terms and conditions of guarantee | AG20 |
| EC | Yes |
| Suitable up to (m²) | 150 |
| Sound level (dBA) | 25 - 57 |
| Power, fan, nom (W) | 73 |
| Connection voltage (V) | 1×230 |
| Hedging (A) | 10 |
| IP class | IP21 |
| Width (mm) | 510 |
| Height (mm) | 772 |
| Depth (mm) | 390 |
| Weight (kg) | 21,7 |
| Filter class | HEPA 14 |
| Coatings/Materials | Natural anodised aluminium |


