Documentation EvoAir A30T EPP G3 White

Brochure

Art. no.: 30075

•

EAN: 7350072461005

”To be there but not to be seen” has guided the development of EvoAir A30T EPP i vitt utförande. Resultatet är ett av marknadens mest kompakta aggregat för lägenheter och mindre villor. Den låga vikten och bygghöjden, i kombination med ett djup som ofta passar i äldre köksmiljöer, gör installationen enkel även där utrymmet är begränsat.

Characteristics

For dwellings up to 80 m²
Efficient rotary heat exchanger
Energy-efficient EC fans
Very low weight: 25 kg
Compact build height: 53.5 cm
Flexible right or left connection

Full product information is available at www.acetec.se

EvoAir A30T EPP EvoControl MPO G3 White Vent unit

EvoAir ventilation units are manufactured and quality assured in Älvsbyn, Sweden.

Technical data

Specification	Value
Connection options	Top
Flow range (l/s)	10 to 60
Suitable up to (m²)	80
Control equipment	EvoControl MPO
Coatings/Materials	White NCS 0500
Type of heat exchanger	Rotating
Placement	Wall
W x H x D (mm)	596 / 535 / 298
Weight (kg)	25
Duct connection (mm)	4 x 125, 1 x 125
Fan power (W)	2 x 85
Connection voltage (V)	1 x 230

For technical advice or to request a quote, please contact sales@acetec.se

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Pressure and flow diagrams

Product dimensions

Designation	Dimensions (mm)
A	596
B	220
C	85
D	300
E	102
F	532
G	40
H	298
I	149
J	48

See designations in the illustration above.

Complementary cooker hoods

Monolith 600 mm RF

Article No: 340167

Monolith 600 mm White

Article No: 340166

392 White 600 mm LED

Article No: 340036

These functional cooker hoods are adapted for this ventilation unit. They are designed for residential ventilation in houses and flats and are equipped with a control function for the unit. The air flow is regulated via the cooker hood damper. The damper has a timer function that automatically switches off the forcing after 60 minutes or when the knob is reset.

Article numbers 340167 & 340166: Cooker hoods with control function against the unit, possibility of forcing and timer control of the damper.
Item number 340036: Pull-out cooker hood for central ventilation with electronic switch, LED lighting and motorised damper. Does not have its own motor and is connected directly to the ventilation system. White front strip included; other colours available as an option.

You can read more about our www.acetec.se

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Installation Instructions

Art. no.: 30075

•

EAN: 7350072461005

Procedure

Installation and commissioning shall be carried out by qualified personnel with the necessary professional knowledge to ensure correct operation.

Right or left configuration is determined by how the unit angle is mounted. The unit is attached to the wall using the supplied mounting bracket.

For kitchen installation

For kitchen installations, the unit and cooker hood are installed as separate units, which simplifies the work. The cooker hood is connected to the unit with a 125 mm hose (not included). The electrical connectors are connected on the underside of the unit.

The minimum construction height between the top of the cooker hood and the top of the unit is 620 mm. This mounting method provides more space for duct adaptation above the unit and enables flexible mounting with a lower lifting height.

Basic flow must not be taken via the cooker hood. A separate exhaust air outlet must be fitted in the kitchen.

DUT below -20 °C

At design outdoor temperatures (DUT) lower than -20 °C shell preheater (accessory) installed in A30T EPP G3 for safe operation.

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Electricity connection

The unit is internally wired and comes with a cord set. The plug is connected to a grounded socket 1×230 V, 10 A slow-blow fuse. The control panel is connected to the unit via a 5-metre flat cable with quick connectors.

When installing with a cooker hood, connect the hood's electrical connectors to the underside of the unit. Connectors for lighting and control signals are also connected directly to the unit's connections.

Commissioning

When commissioning, air flows must be adjusted so that the exhaust air flow is 10-15% higher than the supply air flow (negative pressure) for safe operation. Applies to all operating modes.

Important to consider when installing

Installation and commissioning shall be carried out by a person with sufficient professional knowledge to ensure proper functioning.
If the system is not commissioned immediately, all duct connections should be sealed inside the unit to prevent moist or cold air from entering and causing moisture damage.
All operating modes shall be adjusted (Spruce, Comfort and convenience and Forcing).
The control panel should be positioned so that the user has good access and overview in the event of an alarm.
The user/manager of the installation shall be informed of the location of the control panel and its functions.
The installer shall hand over the manuals and the guarantee certificate to the user/manager of the installation.
The product must be registered at www.acetec.se for the guarantee to apply.
Original filters must be used during the warranty period for the warranty to be valid.

Manual

Art. no.: 30075

•

EAN: 7350072461005

See the technical manual here!

EvoControl MPO

EvoControl MPO offers stable and reliable control via a wired network connection. The system is connected to a cloud-based solution with a responsive design that automatically adapts to the device you are using – whether it is a mobile phone, tablet or computer.

Components

The EvoControl MPO consists of the following:

Display

1.4” OLED display with three physical buttons. LED for visual status indication (see colour codes in technical manual).

Main card

Fuse 5x20mm, 200mAT, 230VAC
RJ45 network socket
Battery CR3225
USB connector

Included

5 m cable 4×0.25 mm² (max. length 25 m)

Installation of the display

The control panel should be installed in a warm, weather-protected and easily accessible space for easy inspection and quick attention to any climate alarms. Avoid placement in humid environments or where condensation may occur.

Mount the control panel on a flat surface.
Pull the cable upwards, downwards or straight backwards as required.
When pulling the cable downwards: unscrew the back cover and turn it over.
Connect the supplied cable (crossed modular cable) to the connector on the underside of the panel.
Open the flaps on the front of the control panel and screw the panel to the base.
Close the hatches again.

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Quick Guide EvoControl MPO

This quick guide applies to standard units without accessories. Please note that some accessories also need to be activated in the settings. For the technical manual, click on the link on the previous page or scan the QR code.

Change operating modes

Step 1)

To change the operating mode, select the row and press Enter.

Step 2)

Select new operating mode with Up arrow and Arrow down and confirm with Enter.

Adjust air flow

Step 1)

Please select Menu and pressure Enter.

Step 2)

Step down to Preferences and pressure Enter.

Step 3)

Enter authorisation code 6374 (8990 for advanced) and press Enter. Enter one digit at a time using the up arrow key. and Arrow down and confirmed by Enter. Confirm the code you have entered by pressing Enter when “-” is selected.

See Step 4 on the next page.

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Step 4)

Please select Fan and pressure Enter.

Step 5)

Select the flow you want to adjust and press Enter.

Step 6)

Increase or decrease the value with the Up arrow or Arrow down and then press Enter.

Step 7)

Confirm by selecting Save = Yes and pressure Enter.

Repeat steps 5-7 to change the parameters you need.

Pressures Back to access the start menu.

- For the A30T with cooker hood, parameter 470 “Priority order” under “Functions” may need to be changed!
- A30T with cooker hood 251, select “Last input”.
- For A30T with cooker hood 392, select “Prio”.
- A30T with Monolit cooker hood, select “Prio”.

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Wiring Diagram

Art. no.: 30075

•

EAN: 7350072461005

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Operation and Maintenance

Art. no.: 30075

•

EAN: 7350072461005

Before working with the unit

Only authorised personnel should operate and service the unit. This instruction applies to all units and describes operating principles, maintenance, troubleshooting and safety measures. The aim is to ensure a long service life, high operational reliability and energy-efficient operation.

The unit contains electrical and moving parts. Despite inbuilt protection, there is a residual risk of electric shock, crushing and cutting during service and maintenance. Always follow the instructions.

General about the unit

The unit is intended for comfort ventilation and air treatment. Operating temperatures, humidity limits and environmental requirements vary depending on the model. The unit should be located in a dry and easily accessible environment. Avoid operation in corrosive or explosive environments.

Service intervals and inspection schedule

Carry out servicing at least twice a year or more often at high load. Supplement with intervals for specific components as below:

Filter byte: every 3-6 months or after a defined number of operating hours.
Checking seals and mouldings: each service.
Checking fan bearings and motors: annually.
Cleaning of rotor or heat exchanger: annually.
Control of sensors and control systems: annually.

See service procedure (cleaning, dismantling, etc.) on the next page.

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Service procedure

Switch off the power to the unit via fuse or plug before servicing.
Secure the unit against accidental re-connection during work.
Wait until all moving parts have come to a complete stop before starting work.
Use personal protective equipment such as protective gloves and goggles. When working with dust, wear a respirator.
Mark the unit with a warning sign during servicing.
Open inspection hatches or panels (e.g. loosen screws with a suitable Allen key).
Take old filters straight out of their mounts.
Vacuum the inside and clean surfaces with a mild detergent (avoid strong solvents).
To facilitate internal cleaning, fans fitted with electrical connectors can be removed from the unit (document electrical connections before dismantling components).
If necessary, clean the rotor or heat exchanger unit according to the recommended method.
Check seals, gaskets and mouldings.
Fit new filters and reassemble components correctly. Original filters can be ordered at www.acetec.se
Check that everything is secure and close the hatches.
Reinstall all guards and ensure proper operation before putting the unit into service.

After completion of the service

Reconnect the power.
Switch on the unit.
Check air flow, fan speed and pressure balance.
Review alarm logs and any error indications.
Listen for sounds or vibrations.
Check operation in different modes (high/low, bypass, etc.).

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Troubleshooting and malfunctions

In case of a malfunction, check the following points before contacting customer support:

No operation: check fuses, power supply, plug.
Low airflow: check filters, fan motors and belt tension.
Abnormal sound or vibration: check fasteners, bearings and balance.
Error indication from sensors: check the cable, sensor and connections.
Control system failure: check communication and parameters.

If problems persist, contact Acetec technical support.

Documentation and spare parts

All service measures must be documented in a service log with the date, signature and measures taken. Only use original spare parts and original filters to maintain the warranty.

Filters, fans and other components can be ordered at www.acetec.se

Technical Data Sheet

Art. no.: 30075

•

EAN: 7350072461005

Specification	Value
Terms and conditions of guarantee	AG20
EC	Yes
EcoDesign	Yes
EuroVent	Yes
Control equipment	EvoControl MPO
Cloud service	Yes
Flow range (l/s)	10 - 60
Suitable up to (m²)	80
Connection options	Top
Customisable H/V	Yes
Placement	Wall
Installation in a cold room	No, it is not.
Duct connection (mm)	4 × 125, 1 × 125
Type of heat exchanger	Rotating
Power, fan, nom (W)	2 × 85
Electric battery power, nom (W)	200 - 800
Connection voltage (V)	1 × 230
Hedging (A)	10
IP class	IP21
Built-in electric battery EV	Yes
Electric battery kit EV (accessory)	No, it is not.
Electric battery kit FV (accessory)	Yes
Cooker hood (accessory)	Yes
W x H x D (mm)	596 / 535 / 298
Weight (kg)	25
Filter class	F5
Coatings / Materials	White NCS 0500
Energy class	B

Acetec

•

Product catalogue

•

EvoAir A30T EPP G3 White

Subject to possible printing errors. Swedish version applies in case of discrepancy.

Date of issue: 11 March 2026

Acetec AB is a manufacturer of dehumidifiers, ventilation units and air purifiers. All development, manufacturing and quality assurance takes place in Älvsbyn, Sweden. This document portal is intended to make it easier to find resources such as technical manuals, operating instructions and all other documentation.

Visit acetec.se

About Us

Find Documents Technical documents Technical support Terms and conditions Privacy policy (GDPR) Cookie policy Cookie settings

Products & Services

HRV Ventilation Unit Dehumidifier Dehumidifier Pro Dehumidifier service Air Purifier Choose a dehumidifier Select a HRV unit Select filter Installing dehumidifiers